Contact Us
  • Tel: +86-513-88690165
  • Mobile: +8613773758150
  • Fax: +86-513-88821119
  • Email: canmachines@yahoo.com

CNC bending machine safety production operation process

[Nov 5,2018]

1. First, turn on the power, turn on the key switch on the control panel, and then press the oil pump to start.
2, stroke adjustment, the use of bending machine must pay attention to adjust the stroke, must test the car before bending, the bending machine must be guaranteed to have a plate thickness gap when going down to the bottom. Otherwise, it will cause damage to the mold and the machine. The adjustment of the stroke also has electric quick adjustment and manual stomach adjustment.
3, bending slot selection, generally choose the thickness of the 8 times the width of the slot, such as bending 4mm sheet, you need to choose about 32 slots.
4, the back gauge adjustment generally has electric rapid adjustment and manual fine-tuning, the same method as the shearing machine.
5. Press the foot switch to start bending. The bending machine is different from the shearing machine. You can release it at any time. When you release the foot bending machine, it will stop and continue to descend.

 
Online Service